|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#31
|
||||
|
||||
|
|
| Sponsored Links | |
|
|
|
|
#32
|
||||
|
||||
|
seems so...
Quote:
|
|
#33
|
|||
|
|||
|
there is a similiar product here in the uk to remove gasket and sealent made by evostick - its sold here in the B&Q stores
I certainly wouldnt cut them open, even if you manage to cut them open I think you will always suffer from moisture/damp issues in the long run as it only takes a small gap and water starts getting in |
|
#34
|
||||
|
||||
|
Hello guys:
I am in the same situation. I bought an angel eyes and I cannot open the headlights. I wrote to the company that sold me it and I am waiting for an answer about or some suggestion. If he answers me with some solution, I communicate it to you Regards from Catalunya: |
|
#35
|
||||
|
||||
|
^^^ They wont tell you anything.
|
|
#36
|
|||
|
|||
|
I am still checking this post everytime it gets a bump. Please share. The Angel Eyes Kit is just sitting at home waiting. I think if i dont get the info. on how to open it, i might just ebay the kit.
|
|
#37
|
||||
|
||||
|
okay guys, to make everything clear, i have not posted due to being hella busy. For the guy who did my lights, I called him up this mornin and he being a ass and is not tellin me nothin. He is basically Arguing with me on the phone about how difficult it was to do the lights and would not do them again.
I kept asking him the name of the spray and he not givin a clue, he knows it might be a lil secret, damn, i dunno! The guys ignorent and wont tell nothin, and refused to cooperate at all. So i dunno what to tell you guys other than the fact that even with the silicon softening spray, you still have to pry of the casing. The one headlight that was post '02 has markings everywhere from a tool prying off the casing, looks molested when you pull the rubber moulding back. Sorry again, didnt want to hype everyone up, but i know it can be done so there is hope. Someone just got to find out wat spray softens that bmw glue, and even with the spray, you will still have to rip it apart and ruin esthetics.
__________________
" Despite its supercar attributes, the M5 still doubles as a soberly practical, spacious saloon - only with the ability to scare four passengers in comfort all the way to the local coronary unit". Top Gear |
|
#38
|
||||
|
||||
|
Main issue to find what kind of glue bmw use for headlights (evostick, loctite & etc.)...if we knew it
((((( then it's so easy to find softener...
|
|
#39
|
|||
|
|||
|
you mean find the glue that Hella uses for the headlights. Id start with them b/c you might have a better shot getting the info from them.
__________________
2002 4.6is Dinan S2 Titanium Silver/Black Alcantara DINAN Stage 4 Engine Software Automatic Transmission Software High FlowThrottle Body Free Flow Exhaust Cold Air Intake System High Flow Air Mass Meter OTHER CCFL Angel Eyes Stealth XM Radio in ashtray : FM Mod Pilot H3 Fog Bulbs Cleared Headlights: Hi/Lo Beams Hardwired Radar Detector IN PROGRESS Powerstop C/D Rotors: (on backorder) W/EBC Red Stuff (F) W/Axxis Deluxe (R) Dice Ipod: Aux Input for XM THINKING SMG II MK4 Bluetooth |
|
#40
|
||||
|
||||
|
I'm sorry, but It seems that nobody knows anything where I bougth, or they do not want to say anything to me...
I'm still waiting for an answer... |
![]() |
| Bookmarks |
|
|
|
|