|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
07-22-2007, 04:48 AM
|
||||
|
||||
|
Replacement CCFL Invertors for Angel Eyes
One of mine has failed but ideally I want to replace both with invertors which DON'T cause the PDC/Dashboard error problem. I am in the UK. 
|
| Sponsored Links | |
|
|
|
|
#2
07-28-2007, 04:28 AM
|
||||
|
||||
|
I have 2 extra CCFL invertors compatible with Angel Eyes for the E53. This inverter is made specially to power Angel Eyes for the E53 cathodes at full brightness. A normal inverter cannot power the full lenth of the ring. It is a potted unit making it shock proof and water proof It is 12 volts and rated to run two rings at a very high intensity. I already replaced my original OEM JLevi AI CCFL Inverters. However, the problem was not with inventer but with ring itself, replecement of both inverters didn't fixed this issue. Rings stay dim for a while till they warms up, so I had also to replace 2 high beam rings. I can sell both inverters for $15 USD each ($30 set) plus $5.00 S/H to UK
I have also 2 extra spare CCFL rings (low beam rings) that were made specifically for the X5.
__________________
" Never argue with idiots; They'll only drag you down to their level then beat you with experience."
|
|
| Bookmarks |
|
|
|
|
Linear Mode
