Part Identification Help Needed

RJRDenver · #1 08-12-2007, 06:49 PM

I recently purchased some headlights to perform a halogen to HID conversion and found one of the units to be damaged. After baking the unit I found the following parts to be broken. Please help me identify to see if I can purchase them.

There are two parts that connect to one another and are used to adjust the headlight beam. These came out of what I believe to be a 2001 headlight. I also snapped a photo of what I believe the date code is but not sure how to read it. Sorry the photos are a little blurry, taken with poor light and from my iPhone.

-

Sponsored Links

RJRDenver · #2 08-13-2007, 11:49 AM

33 views and not a response. I hope this doesn't mean the part is un-replaceable. Leaving comment to bump back to top for one final attempt.

Zulu95 · #3 08-13-2007, 01:20 PM

If it is from inside the unit it may not be listed.
Did you try looking on realoem.com?
Is there a part number on the item?
You may end up having to buy another headlight unless you can grab the part from one of your halogen units.

RJRDenver · #4 08-13-2007, 05:28 PM

Doh!!! That's a great site, hadn't seen it yet. Looks like I'm screwed as far as trying to get a part as its not listed in the diagrams. I am going to continue looking for another assembly to take apart rather than my halogens as they are late 03's and cannot be baked...

anyone reading this, if you have a used '00-02 halogen or projector based headlight (damaged or in good condition) that you'd like to get rid of, please let me know!

Quote:

Originally Posted by Zulu95

If it is from inside the unit it may not be listed.
Did you try looking on realoem.com?
Is there a part number on the item?
You may end up having to buy another headlight unless you can grab the part from one of your halogen units.

Sponsored Links