OK I did transmission fluid flush on my 02 4.4i

[bosanci28]

Hi,

I have my pan down and oil drained , was going to do a change of oil/filter , to see if any different,also i have returned that castrol, and purchased petrosin atf-1,as per Zf chart or bmw chart.

The oil does not smell as burned and is not sooo,black!, maybe dealer lied...

Regarding that sensor , because the pan is down i have access directly to it, and i see 2 wires coming out,but dont know exactly how to test!, i found some chart :

excl. harness at 315 ohms



Now just put red and black tester wires (multi tester) and setting to ohms and test ,and i guess must be at 315?

Thank you,

[RRPhil]

Originally Posted by bosanci28

Hi,

I have my pan down and oil drained , was going to do a change of oil/filter , to see if any different,also i have returned that castrol, and purchased petrosin atf-1,as per Zf chart or bmw chart.

The oil does not smell as burned and is not sooo,black!, maybe dealer lied...

Regarding that sensor , because the pan is down i have access directly to it, and i see 2 wires coming out,but dont know exactly how to test!, i found some chart :

excl. harness at 315 ohms



Now just put red and black tester wires (multi tester) and setting to ohms and test ,and i guess must be at 315?

Thank you,

Yes, that’s my chart. Just measure the resistance across the two pins :



Phil

[bosanci28]

Originally Posted by RRPhil

Yes, that’s my chart. Just measure the resistance across the two pins :



Phil

Hi, Phil,

Yes ,that is your chart!

Anyway,
i tested mine,out like you have in the picture and is at 0.341 k ohms.

Is this okay?



Thank you,