|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
08-17-2005, 02:24 PM
|
||||
|
||||
|
Fog lights question
 Please guys, I need some help..I just got some H1 BULBs from HOEN USA to replace my stock 2001 fog lighs. I follow the thread about removing the fog lights step by step. I t was all good till it skip exactly when i needed the most. HOW TO REMOVE THE ACTUAL BULB FROM THE CASING, the other thing is that these H1 BULBS seems too long. Don't know for sure since i can't remove the other bulb yet. Pls help! 
|
| Sponsored Links | |
|
|
|
|
#2
08-17-2005, 02:44 PM
|
||||
|
||||
|
There should be a wire clip that holds them in place. Just unclip it and remove the bulb. Use care not to touch the bulb with your fingers, as the oils in your skin will greatly shorten the life of the bulb.
__________________
 Xoutpost.com - where you come for the information but stay for the friendships
|
|
#3
08-17-2005, 04:12 PM
|
|||
|
|||
|
I ordered some 8500k H1's for fogs only to discover that they actually take H3's!!
 The place I got them from directs one to Slyvania's online fitment guide. Well, it's wrong. You will note that the H3 bulb has a wire attached to it, the H1 does not. I sent them back, and they are sending me some H3's. Hope this helps.
|
|
#4
08-17-2005, 04:17 PM
|
||||
|
||||
|
|
|
#5
08-17-2005, 04:31 PM
|
||||
|
||||
|
I made this mistake too - Autozone/ Advance has listed in their database that the H1 is the correct bulb for a 2001, but it is a H3.
__________________
2001 X5 3.0i (PP/WP/AP) Traded at 213K miles RARE White on Black - Why does everyone get Tan??  First E53 with 215s on XOutpost!!  
|
|
| Bookmarks |
|
|
|
|
Thanks guys, I finally remove the wire clip and BOOOOOOM, IT'S WORKING!!!
Linear Mode
