|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Hi Guys,
Just purchased a pristine 2005... had a couple of questions that I could use some help with: 1) I was planning on replacing the exhaust tips with chrome/stainless Oval tips, in particular Borla's 20155 tip. The part indicates the inlet diameter on this part is 2 1/2". Without removing the factory tips at this point, it appears that the exhaust pipe is WIDER than 2 1/2". Am I wrong, and would this tip work ok? Any thoughts/experieince with replacing the factory tips would be appreciated. 2) Without putting "flares" on the wheel wells, can someone make some suggestions for matching trim Running Boards, that would blend in, without having to modify the fenders? Any ideas/websites/manufacturers would also be appreciated. Thanks!
__________________
MauiKat ![]() "Life's journey is not to arrive at the grave safely, in a well preserved body, But rather to skid in sideways, totally worn out, shouting, "HOLY SH*T - WHATA RIDE !! " |
|
#2
|
||||
|
||||
|
Welcome to X5world.
If you use the search feature and type in "Running Boards" you will get a flood of info on the subject . Have fun Since this is your first post check out the home page. Lots of good reading regarding mods.
__________________
"What you hear in a great jazz band is the sound of democracy. “The jazz band works best when participation is shaped by intelligent communication.” Harmony happens whenever different parts get to form a whole by means of congruity, concord, symetry, consistency, conformity, correspondence, agreement, accord, unity, consonance……. |
|
#3
|
||||
|
||||
|
Thanks !
__________________
MauiKat ![]() "Life's journey is not to arrive at the grave safely, in a well preserved body, But rather to skid in sideways, totally worn out, shouting, "HOLY SH*T - WHATA RIDE !! " |
|
#4
|
||||
|
||||
|
Start here http://www.xoutpost.com/articles/x5/b...tallation.html
http://www.bmwmotorsports.org/pdf/BM...structions.pdf Quote:
__________________
"What you hear in a great jazz band is the sound of democracy. “The jazz band works best when participation is shaped by intelligent communication.” Harmony happens whenever different parts get to form a whole by means of congruity, concord, symetry, consistency, conformity, correspondence, agreement, accord, unity, consonance……. |
|
#5
|
||||
|
||||
|
Two more short questions in this regard:
1) Has anybody installed JUST the running boards (ie the factory black option), without the flares ? If so, does it work, or does it look lame? 2) Any advise about removing the factory exhaust tips to replace with chrome ovals? - What it the best/easier way to get them off? Just a rubber mallet and chisel/screwdriver, or ? They appear to be just compression hammered on. Also, IS the standard input width of the pipe 2 1/2" - I was thinking of using Borla tips, rather than OEM. Thanks
__________________
MauiKat ![]() "Life's journey is not to arrive at the grave safely, in a well preserved body, But rather to skid in sideways, totally worn out, shouting, "HOLY SH*T - WHATA RIDE !! " |
|
#6
|
||||
|
||||
|
Quote:
__________________
:eek: Sp33dd3m0n90 ![]() |
|
#7
|
||||
|
||||
|
Quote:
I had to cut mine off to install the Ractive tips.
|
|
#8
|
||||
|
||||
|
Thanks for the response, but I verified with the local dealer - they are just pressure hammered on, can be removed with rubber mallet and block of wood or cloth wrapped chisel...
__________________
MauiKat ![]() "Life's journey is not to arrive at the grave safely, in a well preserved body, But rather to skid in sideways, totally worn out, shouting, "HOLY SH*T - WHATA RIDE !! " |
|
#9
|
|||
|
|||
|
The black running boards....
http://www.xoutpost.com/bmw-sav-items...-aluminum.html
__________________
|
![]() |
| Bookmarks |
|
|
|
|