|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
03-31-2008, 12:52 PM
|
||||
|
||||
How to remove overhead panel plate for HomeLink installment? SOLVED w/Pictures!!
I couldn't find this when I searched, so here I go... I bought the HomeLink module (for opening garageports) but don't know how to open the overhead panel plate for installment.  Any ideas? Is there something to unscrew? 
Last edited by Satheesh.net; 04-01-2008 at 09:27 AM. Reason: Solved - with pictures! 
|
| Sponsored Links | |
|
|
|
|
#2
03-31-2008, 03:06 PM
|
||||
|
||||
|
Removing the overhead switch panel
Tools required:
Plastic prying tool or flat thin screwdriver. T10 Screwdriver or T10 bit Gently pry out the overhead interior light with a plastic prying tool or screwdriver(tip wrapped in tape). Open back dropdown compartment. You should now be able to see 4 silver torx #10 screws that are holding up the switch panel. Remove the 4 screws. White smaller connector should be inside opening. I have pictures. PM me. Keywords: overhead interior lights, sunroof motor, Homelink Last edited by 01 BMW_X5; 03-31-2008 at 03:14 PM.
|
|
#3
03-31-2008, 03:19 PM
|
||||
|
||||
|
Quote:
|
|
#4
03-31-2008, 03:45 PM
|
||||
|
||||
|
Here's a few pictures I got from 01 BMW_X5 - Thank you!
|
|
#5
04-01-2008, 09:21 AM
|
||||
|
||||
|
Just insert a small flat screwdriver there and very easily, you can pop out the lighting section.
One more picture:
|
|
| Bookmarks |
|
|
|
|
Linear Mode
