OEM running boards installed! well. almost

[rp-x5]

Originally Posted by nrgetic99

I just modified my standard rivet gun by drilling out the biggest rivet nipple (yup, thats what they are called) by about 1/64" and the plastic rivets fit just fine. The largest size stock rivets also work just fine after this mod as its really on a 1/64".

I have the brushed aluminium ones It took me around 45 mins per side and the most fiddly part is getting the aluminium part to line up perfectly and snap into the fender flares.

David

Thats a good idea! I ordered the plastic rivet gun at NAPA for $26!

[rp-x5]

Originally Posted by rastaFarai

- accept for the front and rear spoiler.. I think a black X5 looks better with a silver skid plate in the front if you are going to add something. jus MO. I don't see the point of adding black 4.6 kit to a black X5 when the trim is black too. I think the X looks great with the running boards.I don't think there's anything else to do for exterior unless you are putting chrome exhaust tips or new wheels.. other than that.. GREAT LOOKIN X!

I will probably do the front skid plate plus the 4.6 rear. thinking of a wild idea of wrapping them in carbon fiber. Some 20" BBS wheels are coming in this weekend

[rastaFarai]

Originally Posted by rp-x5

I will probably do the front skid plate plus the 4.6 rear. thinking of a wild idea of wrapping them in carbon fiber. Some 20" BBS wheels are coming in this weekend

OK - That's a great idea. If you do it.. post pics. (i think that's a given at this point).

[sleepless]

so how much did you pay from Bloomfield ??

[rp-x5]

Originally Posted by sleepless

so how much did you pay from Bloomfield ??

$530, ordered through ebay. its the lowest I've seen so far.

[rp-x5]

thanks guys. The installation is really simple. I think everyone can do it. It took me about 3hrs from start to finish including chilling with neighbors when they saw me working. lol.

[noworyz]

Excellent pics and notes.
You've just convinced me to do my own install - not that it sounded easy, just doable with some instruction.

Your pictures complement the pics in
http://www.xoutpost.com/articles/x5/b...tallation.html
Wonder if there is some way to add them there as well - moderators?

[rp-x5]

just got the rivet gun from NAPA. and this thing works very well. Got all fender flares done in less than 10 mins. in case anyone needs to buy one. its the $25.99 one with the green handle for plastic rivets. www.napaonline.com

[JayX5]

Very Nice! I can't wait to get my running boards now!