|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
HEATER ISSUE NOT FSR
|
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
1. CV joint is bad, replace it. Do both outside half shafts if you can just to know they both are new and don't have to worry about it for a while. You can do the yourself or find a midas or Mieneke type place and they can do it for a lot less than the dealer and a BMW indy mechanic.
2. The rear a/c fan has it's own control so make sure it's off. If the FSR didn't help then probably your blower motor is toast. The 4.6 was made with the ///M style an power in mind. Keep a close eye and treat the tranny with care as that powerful engine maybe too much for that torque converter. Good Luck! |
|
#3
|
|||
|
|||
|
thanks Big J. yeah i have had my share of bmw tranny problems (auto) so now i baby them.i
i removed the FSR and spun the fan the fan spins freely i removed the control panel with the vehicle running the rear fan would stop as i shook the panel i removed the panel removed the covers checked all the connections visually checked the board to the eye all looked normally cleaned the connections plugs it in and YES the fan works i put the everything back together it is working beautifully. thanks again. |
![]() |
| Bookmarks |
|
|
|
|