|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Problem SERVICE INTERVAL LIGHTS
[FONT='Arial','sans-serif']1. Key in 0 or off position. 2. Press and hold odometer button and turn key to 1 or acc. position. 3. Keep button pressed until any of the following words appear in display: "oil service" or "inspection", with "reset" or "re". For vehicles with "high cluster", the fuel amount (in litres) remaining until next service is displayed (i.e. 3224). [/FONT] [FONT='Arial','sans-serif'] for the number 3 above my display read "Reset -477 1 or I[/FONT] [FONT='Arial','sans-serif'] 4. Press and hold button again until "reset" or "re" flash. If there is no "flash", minimum consumption value has not been met. the "reset" was flashing as stated above 5. While display is flashing, press button briefly to reset service interval indicator. After display has shown new interval, the following will appear in display for approx. 2 seconds:"END SIA" for number five my display read: End Sia 716 d nothing happend i did the above steps a few times with same result. my service interval lights are one yellow and one red with "inspection" written below. any help would be greatly appreciated. [/FONT] |
| Sponsored Links | |
|
|
|
|
#2
|
|||
|
|||
|
![]() |
| Bookmarks |
|
|
|
|