CV Boot DIY (pictures) - Xoutpost.com

		Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
CV Boot DIY (pictures)

Xoutpost server transfer and maintenance is occurring....

Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management

LinkBack

Thread Tools

Display Modes

07-26-2009, 12:52 PM

amacman

Member

Join Date: May 2008

Location: glasgow,scotland

Posts: 1,462

Mr killcrap sir ,can you tell me is the 36mm nut the one on the end of drive shaft seen when bmw cap removed and when the control arm bolt removed is there enough movement available with the tension arm and steering still connected to allow the drive shaft to be removed from hub .
also can i leave wheel speed sensor in place whilst doing this .
i need to replace right front outer boot so will i need to disconnect some piece of the ride height sensor .and are you saying that the brake calliper stays put .

Bookmarks

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Contact Us - Xoutpost - Sponsors - Archive - Top

All times are GMT -4. The time now is 05:22 PM.

© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.