|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
03-16-2009, 01:19 PM
|
||||
|
||||
|
Knee bolster removal
Anyone have some direction or info on removing that under paneling below the steering wheel? I've taken all the visible screws out, but before i start pulling I'd like to have an idea of what to expect... Thanks in advance! Last edited by stovee; 03-16-2009 at 02:04 PM. 
|
| Sponsored Links | |
|
|
|
|
#2
03-16-2009, 01:48 PM
|
||||
|
||||
|
On my 4.8 there are 3 areas.
1) Lowest area (plastic panel) has about 4-5 screws and 2 plastic twist-off holders by the firewall. 2) Next is the lower dash. More screws. 3) The lower dash is attached to a plastic/rubbery steering column cover. Be careful not to tear it. They are jsut snapped on with some plastic push-ins. Check the article for a DIY wiring angel eyes as DRLs, I think there are pics there. Good luck! 
|
|
| Bookmarks |
|
|
|
|
Linear Mode
