Connect Fog lights to main beam

[sobi6111]

I am interested in tha as well. I want when I turn on high beams,a don't want fogs be switched of ;-)

[Armen]

Originally Posted by sobi6111

I am interested in tha as well. I want when I turn on high beams,a don't want fogs be switched of ;-)

I solved this problem by decoding the LCM to euro standart. Cause in cars suited for non american use you can switch on high beams together with the fog lights.

[Rondo]

Originally Posted by Armen

I solved this problem by decoding the LCM to euro standart. Cause in cars suited for non american use you can switch on high beams together with the fog lights.

Hi what software did you use?

[nigeyboy]

I was thinking it only needs a link between the high beam relay & the fog lamp relay? At worst it'd need a relay between them to stop high beam coming on when the fogs were switched on. Also it could be switchable to reset to factory settings for MOT time or whatever?

Just thought it might have been done on here before.

[Armen]

Originally Posted by Rondo

Hi what software did you use?

A programmer that did the operation used INPA software.

[killcrap]

Originally Posted by Armen

A programmer that did the operation used INPA software.

you mean NCS. the correct string is

FL_UND_NSW_NICHT_GLEICHZ
nicht_aktiv


set it to

FL_UND_NSW_NICHT_GLEICHZ
aktiv


FL - Low Beam
UND - And
NSW - Front Fog Lamps
NICHT - Not
GLEICHZ - Together

dont know if it still works, but it worked on my e39. go to retrofit coding via e32 on progman, and select e53, and select rear fog lamps, and the coding will be set to active.