X5 PDC

daztc · #1 07-14-2009, 02:51 PM

I have just purchased 3.0i x5 but the parking sensor both front and rear do not work....i get a continuous sound and flashing switch when resrve is selected...i assume its the main sensor switch...is there anyway of checking and where is the switch located?

AZX54.4 · #2 07-14-2009, 04:12 PM

This is not a problem with the switch. If the light on the PDC button is flashing there is a problem with the sensors. Check all of your sensors. This will happen if one of them is damaged or no longer working. If one is damaged or not working it will set the entire system off. Good Luck

killcrap · #3 07-14-2009, 04:14 PM

Quote:

Originally Posted by daztc

I have just purchased 3.0i x5 but the parking sensor both front and rear do not work....i get a continuous sound and flashing switch when resrve is selected...i assume its the main sensor switch...is there anyway of checking and where is the switch located?

possible vehicle was in accident, and wiring was severed, read out fault memory, and see which one is not communcating with the pdc module

Simon_0106 · #4 07-14-2009, 04:46 PM

Hi, I have a simular problem with my e39

but no flashing light

does that mean that my pdc ecu is no good???? Any help would be appriciated. Thanks

BimmerDude · #5 07-14-2009, 04:56 PM

I have the same problem. All you have to do is get real close to each sensor. You should hear a ticking sound if the sensor is working. When you find the one or more that do not tick, those are the sensors that need to be replaced. I found mine, but problem is that its the front left side. I have to drop the bumper to remove this sensor. Sucks, but there is no other way. Would anyone know another way to change this sensor without removing the front bumper? Thanks

AZX54.4 · #6 07-14-2009, 05:59 PM

Quote:

Originally Posted by BimmerDude

I have the same problem. All you have to do is get real close to each sensor. You should hear a ticking sound if the sensor is working. When you find the one or more that do not tick, those are the sensors that need to be replaced. I found mine, but problem is that its the front left side. I have to drop the bumper to remove this sensor. Sucks, but there is no other way. Would anyone know another way to change this sensor without removing the front bumper? Thanks

I need to replace the front left corner PDC on my 05 X5. I believe you might be able to get to the PDC in the corner with out removing the bumper. I am going to try by removing front left wheel (for better access) and then remove the plastic wheel liner, pull that back and i think i should be able to reach the PDC. The new PDC is being shipped so when it arrives I will try this out and see if it works. I will post how it works out.

Has anyone else tried this method???

pochiserna · #7 07-15-2009, 11:45 AM

Quote:

Originally Posted by AZX54.4

I need to replace the front left corner PDC on my 05 X5. I believe you might be able to get to the PDC in the corner with out removing the bumper. I am going to try by removing front left wheel (for better access) and then remove the plastic wheel liner, pull that back and i think i should be able to reach the PDC. The new PDC is being shipped so when it arrives I will try this out and see if it works. I will post how it works out.

Has anyone else tried this method???

I was thinking of doing the exact same thing but haven't had a chance. I also need to replace that front left sensor and the way you describe on doing it seems easier than taking off the bumper. Please let us know how it works out.

AZX54.4 · #8 07-15-2009, 12:39 PM

Quote:

Originally Posted by pochiserna

I was thinking of doing the exact same thing but haven't had a chance. I also need to replace that front left sensor and the way you describe on doing it seems easier than taking off the bumper. Please let us know how it works out.

@ pochiserna I ordered the PDC sensor from a company outside Sacramento, CA. Bavarian Auto Recycling Inc. They have an ebay store and sell many parts for our cars at a good price. I will keep you posted on if this method to replace the sensor works. The PDC will arrive tomorrow but I will be out of town for the weekend so it might not be until later next week that ill get a chance to install it. Either way ill keep you up to date on how i install the new PDC!!

individualsole · #9 07-15-2009, 01:56 PM

I have the same problem as daztc, but I basically just lived without it. It would be nice to have them working.

pochiserna · #10 07-15-2009, 05:30 PM

Quote:

Originally Posted by AZX54.4

@ pochiserna I ordered the PDC sensor from a company outside Sacramento, CA. Bavarian Auto Recycling Inc. They have an ebay store and sell many parts for our cars at a good price. I will keep you posted on if this method to replace the sensor works. The PDC will arrive tomorrow but I will be out of town for the weekend so it might not be until later next week that ill get a chance to install it. Either way ill keep you up to date on how i install the new PDC!!

How much was the sensor? New from the dealer is around $145 + tax and from Bavauto is $129.99 no tax. I tried to call that place that you mention a couple of times before but nobody ever answers the phone. What's the best way to contact them? Will be anxiously awaiting to see how your install goes... good luck!!!