|
I didn't remove the vents just the tub going to it. As for pulling up, you will need to pull back about 2 inches first as there are 2 or 3 position pegs in the front. Be careful when lifting out not to let the pins scratch the dash.. You are best off positioning the passenger seat all the way down and back so you can slide the console up and over. Three things to remember, 1. connect all plugs when putting it back in, 2 cover the seat and dash with towels, 3. you can do it... It took me about an hour and I was so frustrated I almost gave up. Also, to get the shift know out put it in nutral, climb in the back seat, pull up while falling back... Good luck
|
07-29-2009, 09:07 PM
Threaded Mode
