|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
One door unresponsive
I posted a question in regards to my cabin light... Well, I've noticed too that the same door would not respond to locking the door or opening the window from the driver side. Opening the window on that door would work. Even locking through the fob would not work. This just happened so recently. Has anyone got this problem before? Any fixes and help would be greatly appreciated. Thanks a lot. Tagacebu |
| Sponsored Links | |
|
|
|
|
#2
|
|||
|
|||
|
Can you open the door manually from the inside? Is it possible to lock the door manually as well?
|
|
#3
|
|||
|
|||
|
Quote:
1) the master controller in the driver door is malfunction 2) wiring problem. 3) fuse since interior light is also out. |
|
#4
|
|||
|
|||
|
I wonder where the fuse would be.
Yes, I can still open and lock the door from the inside. I can even open the window from that door but not from the master controls. |
|
#5
|
|||
|
|||
|
Quote:
I wonder if you can get to master controller inside the driver side door (I did this when replacing the door actuator once and can't remember now if you can have access to the back od master controller wiring) and swap the "problem" door side channel to "working" door channel to see it that channel is indeed bad. If problem persist after swapping then you know you have wiring problem. Hope that makes sense. |
|
#6
|
|||
|
|||
|
Now, I've noticed something else.
The mirror will not work. I checked the speakers an they are ok. Again, I can control the operation of the window on the affected door bit cannot use the control on the driver door - for windows opening and closing, locking and unlocking the door and te mirror. But I like this discussion. Thanks. Tagacebu |
![]() |
| Bookmarks |
|
|
|
|