Icelink install

[iMPAKT]

i just installed the icelink plus into my x5 and everything worked out fine. it took me about 2 minutes to find the wires and about another 30 seconds to find out where i wanted to place my ipod. a few problems i'm having is when i press 6 the menu isn't showing up and the song titles aren't showing up

[ifly]

Did you pull the power before install as that has caused problems before, also contact Tom G to get the latest firmware.

[bob01]

Congrats!

Here're some pointers based on my own experience...

1. First, make sure you're running the 2B2 firmware from Tom G.

2. Press and release [disc-6], don't hold it down

3. Look at the iPod's screen - you should see the Dension logo.
- On hitting [disc-6] a menu should appear, scroll through the menu with [<] and [>] or the NAV wheel, select by pressing and holding the [>]
- Select "Setup"
- Select "Text Selector" - the MID should now read "Select 1" and the NAV should say "Select 3" <- * I think - going from memory here...*
- press [disc-1] for iPod text on the MID, [disk-3] for the NAV
- done.

Cheers,
- Rob

[Tom G.]

Good memory!