Help/Passenger Door Will not open

WOOD56 · #1 02-28-2009, 09:24 AM

I’m unable to open the p/s door. Inside and outside handle will not open the door. I have manage to get access to the inside of the door by taken off the door panel. The problem is what inside that I need to touch, move or pull to release the latch to get the door open.

All other doors lock and unlock via the remote and center button. I have done a reset by removing the battery connector. I have read over 200 or more post on frozen door lock assy and carrier replacements. But all don’t say how to get you door when the lock is failed. Any suggesting.

youry · #2 02-28-2009, 09:53 AM

You have to get to the carrier and try to twist it each direction. You might get lucky.

Or try to reach the actuator

number 15 in this picture
RealOEM.COM * BMW E53 X5 3.0i DOOR CONTROL FRONT

WOOD56 · #3 02-28-2009, 10:33 AM

Quote:

Originally Posted by youry

You have to get to the carrier and try to twist it each direction. You might get lucky.

Or try to reach the actuator

number 15 in this picture
RealOEM.COM * BMW E53 X5 3.0i DOOR CONTROL FRONT

I been up and down inside this door and pulled on 2 cable inside to release the latch. no good. one cable is attached to the door handle as I pull it from the outside that I feel going the mech inside and no good. the actuater seem to have three moving parts.. one from the handle when you pull up on the outside. 2. from the handle inside when pull nothing 3. is the Door lock rod; which is in the lock position and when pull up nothing happens. but one returns to the lock positing.

Next.....

youry · #4 02-28-2009, 10:38 AM

you have to make sure the rod (number 4 in the picture) is up and then try to pull the actuator handle that comes from the carrier. if you already removed the rod then make sure the handle that the rod attaches to is in the up position

WOOD56 · #5 02-28-2009, 10:51 AM

Quote:

Originally Posted by youry

you have to make sure the rod (number 4 in the picture) is up and then try to pull the actuator handle that comes from the carrier. if you already removed the rod then make sure the handle that the rod attaches to is in the up position

still a no go. pulled on both the carrier with is attach the outside door handle and number 5 (realoem), both while holding the up 4(realoem) and latch do not release. remember not I working on a door that is close. I lying over the center console to do this..

youry · #6 02-28-2009, 10:55 AM

Quote:

Originally Posted by WOOD56

still a no go. pulled on both the carrier with is attach the outside door handle and number 5 (realoem), both while holding the up 4(realoem) and latch do not release. remember not I working on a door that is close. I lying over the center console to do this..

it could be the actuator broken inside. never heard this before

WOOD56 · #7 02-28-2009, 12:32 PM

Quote:

Originally Posted by youry

it could be the actuator broken inside. never heard this before

that could be the problem. but I will never know until I get the door open. Is it possible that there a special tool that BMW use to open door in this situation.