|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#21
04-01-2010, 12:24 PM
|
||||
|
||||
|
| Sponsored Links | |
|
|
|
|
#22
04-01-2010, 01:03 PM
|
||||
|
||||
|
I was in the middle of doing this when you responded. To put it textually, the top cutout is one big cutout spanning about 15" across the top with angles to the bottom middle. Because of the mirror cluster you have a good solid 3"X3" square on each side, plus the part that angles up to the corners (~6" across the top). The bottom cutout is about 3"X3" as well, but you have a wiper right in the middle. As you can see I found the camera, but as I've stated before I am not Ansel A.
Scott
|
|
#23
04-01-2010, 03:40 PM
|
||||
|
||||
|
I'm having a Comfort Windshield installed tomorrow. I just paid the difference between what my insurace co. paid for my cracked windshield and a new Comfort one (100)
Looks like the cutouts for the V1 and turnpike transponder are a little on the small size....
__________________
03' X5 4.4i Black Sapphire/Black 04' Land Rover Range Rover HSE 95' Jeep GC Ltd
|
|
#24
04-01-2010, 04:54 PM
|
||||
|
||||
|
My thoughts too, particularly given the bump that exists from the garage opener/microphone/assist buttons panel. Do you have a V1 or other detector and can you give installation a shot and let use know?
Where are you having the work done, BMW dealer or another shop? Are you getting the OEM or OE comfort windshield? Quote:
|
|
#25
04-01-2010, 07:01 PM
|
||||
|
||||
|
OE windshield only. I'm having my dealerships installer do it at my house so the X can sit for 24hrs after to le the adhesive cure properly
I have a V1/S1 setup
__________________
03' X5 4.4i Black Sapphire/Black 04' Land Rover Range Rover HSE 95' Jeep GC Ltd
|
|
#26
04-01-2010, 07:22 PM
|
||||
|
||||
|
Why are you insisting on OE vs OEM out of curiosity?
Quote:
|
|
#28
04-01-2010, 07:33 PM
|
||||
|
||||
|
Understood, but whose warranty? I believe BMW's 2 year parts warranty will only be valid if BMW does the work. The installer probably has his own warranty and I'm sure that one is the same for OEM and OE glass. Peace of mind goes a long way I'll agree with that; however I'm not sure if there is any discernible difference between OE and OEM glass.
|
|
| Bookmarks |
|
|
|
|
Linear Mode
