Yet another Tire thread- Something finished on both sides?

[4.8ISInCanada]

I need tires for my 4.8IS and all I want is something that is finished both inside and out (Not talking about the inside of the tire I mean the sidewall that faces out vs the sidewall that faces in so i can rotate my rears left to right (swap rims) to spread out the wear pattern a bit.

I have Diamaris now and they look like crap on the inside wall. Proxes look good in pics but I cannot find one of the inside sidewall.

Open to brand suggestions but am only interested in a tire that meets my criteria of being properly finished on both the inner-facing and outer-facing sidewalls. Any thoughts?

Thanks.

[Repoman]

My previous proxes looked identical on either side so they could be flipped. My new Nankang SP-5's are also identical on both sidewalls. I did see a set of Diamaris and also noticed that the inside sidewall of the tire looks almost like it is unfinished. You would think you have paid them enough for two finished sidewalls. Haven't had/seen any others.

[X5 Meister]

Bad idea to rotate at all, much less left to right.

[4.8ISInCanada]

Can't see it.

[_AC_]

Originally Posted by X5 Meister

Bad idea to rotate at all, much less left to right.

If he is going to unmount and remount to maintain the correct directional position, I don't see why it is a bad idea.

[nom3rcy]

Originally Posted by _AC_

If he is going to unmount and remount to maintain the correct directional position, I don't see why it is a bad idea.

The natural wear of the tires with the camber as it is creates a nice flat contact patch with the road.

Flip that tire to the other side and that flat contact patch is now at an angle to the road surface.

It really isn't a good idea. BMW does not recommend it.

[motordavid]

Originally Posted by nom3rcy

The natural wear of the tires with the camber as it is creates a nice flat contact patch with the road.

Flip that tire to the other side and that flat contact patch is now at an angle to the road surface.

It really isn't a good idea. BMW does not recommend it.

...and, don't quite understand the goal of reversing the tire,
"inside out".

The interior sidewall is going to be pretty dull from oxidation, even if
it was cleaned up and had the sidewall markings/look the OP was after.

[nom3rcy]

I wouldn't rotate the tires at all if I were you.

The reason the Diamaris are not finished is because they are directional and side-side specific.

[PersonaNonGrata]

Asymmetrical tread patterns preclude side-to-side rotation. This applies to many of the tires offered for X5 applications.

[n2red]

Originally Posted by PersonaNonGrata

Asymmetrical tread patterns preclude side-to-side rotation. This applies to many of the tires offered for X5 applications.

I agree.

The only rotation I recommend (If you absolutely HAVE to rotate, because you're lying awake with the mantra.."Must rotate tires...Must rotate tires....), is front to rear on the same side, and only then if all four tires are identical, not staggered....

Another thing I'd stay away from is unmounting/remounting tires, just for positional reasons. Most tires will not seat well to the bead of the wheel the second time around, and will develop small air leaks between the bead of the tire and the wheel. Not saying you ABSOLUTELY WILL LEAK, but I AM saying that youd better invest in a small home air compressor to use every three days to put 5 pounds of air back in the tire(s).

... Ask me how I know this.....