Drivers window

erisol · #1 04-05-2010, 03:00 PM

Hi, my driverwindow dont work, i hear the switch clik as it shuld and this sound disepear when i remove the socet under the switchcontrol on the door.
All three other doors work fine, this may be the switch or the el motor?
What is a windowregulator, is this an electric component or mecanic divice?
I see under how tos, and that looked like a metalframe whith wires, wil the el motor run if its the regulator who i understand is a comon problem?
All fuses are ok.

Erik

Sponsored Links

Repoman · #2 04-05-2010, 03:12 PM

It sounds like your window regulator has let go. It is a mechanical device that is powered by an electrical motor. The electrical motor part is fine, just the mechancial part is not working as it should. This is almost always traced back to a plastic piece that has broken or cracked . . . either a plastic pulley or a plastic rail slide. You can get them aftermarket for around $80 but that doesn't include changing it out. My 5th one let go a couple of weeks ago. It's really a joke the way these things are made.

erisol · #3 04-05-2010, 03:29 PM

Ok, thank you. But i cant hear the el motor run when i push the switch, only a small clik.Its still the regulator, right?

Michelle · #4 04-05-2010, 03:42 PM

STOP PUSHING THE SWITCH! The broken cable from the regulator will get wrapped around it and tear up the motor... which is a $500 (USD) part!

Repoman · #5 04-05-2010, 04:25 PM

Quote:

Originally Posted by erisol

Ok, thank you. But i cant hear the el motor run when i push the switch, only a small clik.Its still the regulator, right?

Yes, the motor is trying to raise/lower the window (clicking sound) but the piece that is broken is binding up the mechanism. Like Michelle said, don't push the switch anymore or you could possibly affect the motor. Mine was stuck in the down position (like yours is probably too) until I got the new part in and dismanteled the door.

If your X sits outside and you can't afford to have the window down, you could remove the door panel and assist the broken mechanism with your hand to get it back up again. Of course there is a procedure for this that you need to follow closely to avoid any other issues.

erisol · #6 04-05-2010, 04:27 PM

ops..... from now on i wont do it, thank you!

erisol · #7 04-05-2010, 04:32 PM

No, the window is up. So thats no problem.
but the last few weeks the window has been working on and off, newer stoped open or in betwen, always from closed.
Pushing a few times it started and work ok.

Repoman · #8 04-05-2010, 04:44 PM

Sounds like it's one of the rail clips that broke on the regulator track. This would allow the window to cock just a little bit and bind in the window guides. You're lucky it's up. I would keep it up until you are ready to fix it or there is a good possibility that it will get stuck in the down position like mine did. If it is going up and down with no problem then you are getting extremely lucky. Your luck will run out soon though.

erisol · #9 04-05-2010, 05:20 PM

Thanks again for fast reply, il open the door tomorrow after work and see what i find, maybe you have a partnumber on the railclips or two if they are diferent?

Repoman · #10 04-05-2010, 05:43 PM

This is what you'll need.

Window Regulator Front Left BMW E53 X5 3.0 4.4 2000-06 : eBay Motors (item 390137808045 end time Apr-30-10 09:41:47 PDT)

Not sure about BMW part number because I never wanted to replace it with an OEM. OEM's cost 3 times the price and break just the same.

Sponsored Links