|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
parts for towing
I have just purchased a popup camper that has electric brakes and I am wanting to get the E53 up to the task to pull it. I have the BMW hitch on its way along with the BMW 2" ball. I have also found out today after talking to the man that delivered the camper that I will need a brake controller. After doing my research I have decided I will be going with the prodigy P3. The man also said I will need a "Circle 7" connector installed on the X5 for the lights and brakes. What does this connector do that the BMW wiring harness does not? Do I need anything else to pull this camper?
thanks
__________________
![]() '08 E90 328i Sport '04 E53 3.0 '02 E46 325i Sport '91 E30 325ic M-Technic |
|
#2
|
|||
|
|||
|
I just installed the same setup on mine. Prodigy and oem hitch and harness. The harness comes with all you need.
|
|
#3
|
||||
|
||||
|
so I can take the wire from the camper and plug it directly into the wire harness then? I just found these and thought that i may have needed one.
RealOEM.com BMW E53 X5 3.0i Trailer Accessories thanks
__________________
![]() '08 E90 328i Sport '04 E53 3.0 '02 E46 325i Sport '91 E30 325ic M-Technic |
|
#4
|
|||
|
|||
|
My harness came with the round plug and the smaller 7? flat pin plug too. All I needed to do was plug the hookup from my trailer into the harness plug.
|
|
#5
|
||||
|
||||
|
great thanks
__________________
![]() '08 E90 328i Sport '04 E53 3.0 '02 E46 325i Sport '91 E30 325ic M-Technic |
![]() |
| Bookmarks |
|
|
|
|