|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
04-20-2010, 01:26 PM
|
||||
|
||||
|
Another angel eye problem!!!
I was walking to my truck and the drivers side angel eyes just randomly went out. I was so fed up with stuff breaking on this thing, I just kept walking to get what I needed out of the back of my truck. Reluctantly, when I came back around to the front, I looked and they were on again like it never went out. Yesterday, I noticed that the drivers side was out again. It looked like the smaller one was dimmed and the larger one was out. A little later they looked to be completely out. I quickly looked around and was happy to see that atleast the wires were still in the rings this time. So now the drivers side won't come on anymore. The passenger side still works fine. I haven't had a single problem until now. Super white and bright and no flickering. Does anyone have ANY suggestions that wouldn't require me opening them again? I really do not want to do this a third time. 
|
| Sponsored Links | |
|
|
|
|
#3
04-20-2010, 02:05 PM
|
||||
|
||||
|
When I first put the CCFL angel eyes in my truck I had a problem on the drivers side where they went out within the first week. I figured out it was due to placement of the inverter box. I had it too close to the oil filter housing and it got too hot. After replacing the inverter box and putting it in a better location farther away from things that get hot I haven't had any problems. Just something to check.
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is 
|
|
#4
04-23-2010, 08:32 AM
|
||||
|
||||
|
Good idea... Mine is actually right near the oil filter too. I'll defintely relocate it.
Where can I find the ballasts that down interfere with the PDC? It really annoys me and I can't seem to find a post about where to get them.
|
|
#6
04-23-2010, 02:56 PM
|
||||
|
||||
|
Quote:
But if I come across them in the future I will surely scoop them up and put the fuse back in for the PDC.
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is
|
|
#8
04-27-2010, 10:23 AM
|
||||
|
||||
|
Quote:
|
|
| Bookmarks |
|
|
|
|
2001 X5 4.4i WHITE-Loaded like a baby's diaper SOLD
Linear Mode
