|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
05-13-2010, 01:18 PM
|
||||
|
||||
|
water condensation in my headlight
is it caused by the water condensation and the angel eyes would turn on when the condensation goes ? 
|
| Sponsored Links | |
|
|
|
|
#2
05-13-2010, 01:25 PM
|
|||
|
|||
|
OEM or Aftermarket?
Check all the caps and make sure they are on tight. If you opened them for the angel eye installation its probably your seal.
__________________
2006 4.4i 
|
|
#3
05-13-2010, 02:52 PM
|
||||
|
||||
|
it s a new headlight
i noticed that when i tap on the external cover of the headlight the angel eyes turn on for a second im waiting until tomorow to see if the angel eyes failure is caused by the condensation
|
|
#4
05-13-2010, 09:28 PM
|
||||
|
||||
|
I doubt its the condensation causing the AE problem. I'd double check the harness connection to the HL and also the connection to the AE inside the HL.
For the condensation, eh wouldn't worry too much. You can check the different caps for proper fit - side light, AE, and main. There are I think two holes with breathers on the back of the HL assembly. Moisture can obviously go through there. You can check and make sure the breathers didn't fall out or just block the holes completely. Good Luck! 
|
|
| Bookmarks |
|
|
|
|
Linear Mode
