|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
06-07-2010, 10:02 PM
|
|||
|
|||
|
oh....suspension noises....
replaced all front suspension components (ball joints, both control arms, sway bar links, upper strut mounts). Everything feels much better, and my shimmy is gone. But. I still have a very annoying rattle/clunk/thunk under strut compression. Seems to come more from the left hand side than the right, but i always set on the left ;-) I can sometimes feel it through the steering wheel, othertimes not. The only real things left to replace are the struts themselves, or the tie rod ends. I havent' noticed any play in the tie-rod ends. ideas? advice? 
|
| Sponsored Links | |
|
|
|
|
#4
06-07-2010, 11:41 PM
|
||||
|
||||
|
Could be your strut top mount. Here is a post of my issue and a pic of the part I am referring too.
http://www.xoutpost.com/bmw-sav-foru...rut-mount.html Here is a link to real oem site and its part #1 RealOEM.com BMW E53 X5 4.4i GUIDE SUPPORT/SPRING PAD/ATTACHING PARTS
__________________
2002 X5 4.6 Sold Dinan CAI, TB, Mass Air, Stage 4 engine & tranny software, X-pipe 2004 745Li 1997 Ford Mustang Cobra Vert 1985 Mazda RX-7 13B-REW single turbo 60-1, Haltech, Meth injection, MSD Ignition, and much more 2008 Mazda Speed3 Hypertech Tune   
|
|
#5
06-08-2010, 08:07 AM
|
|||
|
|||
|
Redline, yeah. I thought initially it was the top strut mount as well. I replaced part #6 in the diagram, but couldnt' see any rubber or bearing part in part #1 that would disintegrate and make a noise. Maybe I missed something. It *sounds* like a bad strut mount to me.
I'll eventually get it sorted out. Anyone else replace the entire front end at 75K miles? It was showing signs of wear at 60K, and at 70K made enough noise that you went crazy... Cant' really complain. It's the first real repair I've had not under warranty.
|
|
#6
06-08-2010, 08:20 AM
|
||||
|
||||
|
What I like to do with most of my vehicles is just replace the whole front suspension (at least all of the normal replacement parts) when they start wearing. That way you don't have to worry about it for another 80k miles as it is all new again.
FWIW I have a creaking in my front end coming from inside the left front strut... it comes and goes but is really annoying when it happens. Sometime in the nearish future I plan on changing my struts and mounts with OEM. (keeping the dinan camber plates naturally  )
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is 
|
|
| Bookmarks |
|
|
|
|
2001 X5 4.4i WHITE-Loaded like a baby's diaper SOLD
Linear Mode
