|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Drivers side front door lock stopped working!
Any help would be greatly appricated!
__________________
![]() 04 Titanium Silver X5 98 Fern Green M3/2 |
| Sponsored Links | |
|
|
|
|
#2
|
|||
|
|||
|
Wel found an online dealer for the door lock actuator for $135. Replaced it and now it works great!
__________________
![]() 04 Titanium Silver X5 98 Fern Green M3/2 |
|
#3
|
|||
|
|||
|
Door Lock Actuator
I have the same problem but couldn't find an actuator for under $190 shipped!
I found some universal actuators for $15, but doubt they'll fit. The only thing I found was the entire Driver Door Lock MOTOR that included the actuator. Where did you buy your part? And thanks for following up on your post from June. |
|
#4
|
|||
|
|||
|
$136.19 Its the whole unit. Cant buy the generic actuators....
This is the site... Direct BMW and Mercedes Parts and Accessories
__________________
![]() 04 Titanium Silver X5 98 Fern Green M3/2 |
|
#5
|
|||
|
|||
|
Door Lock Motor Unit
Thanks a bunch, ordering today!
BTW- nice X, same wheels, color, & glass trim as mine!! |
|
#6
|
|||
|
|||
|
Thanks!
It took me about an hours or so. Just a tip...when you have most of the plastic clips out of the way, there is one in the middle that needs to be played with. Just lift the door panel straight up to get the door panel off.
__________________
![]() 04 Titanium Silver X5 98 Fern Green M3/2 |
|
#7
|
|||
|
|||
|
Door Lock Motor w/ Actuator // Follow-up After Installation
Got it. Thanks.
FYI for future readers of this thread- order this part on-line to get the $136 price. If calling their toll-free number, they charge $200. This is an assembly, can't just buy the actuator. Update: This fixed the problem. To do this job, you'll need a torx30 to unbolt it from the door jam side. If doing the driver side, you will need to remove the lock cylinder. It is very easy to do that- just unscrew 1 torx bolt from the access hole in the door jam and it just slides out. Once it's out, the new Door Lock and Motor will pop right out. Disconnecting the electrical connection and both door handles is easy to do even before unscrewing the lock/motor. Last edited by thunderX; 11-01-2010 at 09:05 PM. |
|
#8
|
|||
|
|||
|
Did you order the 00-06 or 00-04 model year part? I have an 04 E53 4.4 if that makes a difference . . .
|
|
#9
|
|||
|
|||
|
Which one?
Just call them to clarify... I did.
But the part I got was the one for $136. You need to specify which door and year. Works great now, even in cold weather! lol |
|
#10
|
|||
|
|||
|
What were the symptoms when this part went bad? I have an intermittent problem opening the rear door from the inside. If its locked, when you pull on the inner handle the lock pops up then on the second pull it doesnt do anything. I can usually open it from the outside, but that is getting harder too now. I already replaced the carrier thinking that was the problem, but it wasnt.
__________________
|
![]() |
| Bookmarks |
|
|
|
|