CV BOOT REPLACED IN 30 MINUTES

[wpoll]

Originally Posted by ArchE53

Thanks.

Naturally, you would do this with the new boot well up the halfshaft clear of and potential hammer damage.

Nope - at this point the new boot is sitting in it's box on your workshop bench... You haven't gotten the old boot off yet...

[upallnight]

I have a Kent Moore J-41398 cv joint removal tool that I use along with my 5 pound slide hammer to pull the outer cv joint off the axle. One must secure the axle so that when you go to slide the outer cv joint off the axle you don't pull the inner cv joint apart.