|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#12
07-09-2010, 12:23 PM
|
|||
|
|||
|
Ya, taking the clips off was really not that bad, but the installation is a differant story. There is very little play in the wiring, I suppose I could have turned the intake on its side which would have made the right side very easy.
It's done now. Fresh fluids go in tonight then we are back on the road. 
|
|
#13
04-19-2011, 09:18 PM
|
|||
|
|||
 Well for me is different scenario, because Not only I removed one side of each injector's clips to remove the two electronics box, but I have completely eliminated them and throw all of them away for an easy future removal.Well...  everyone who have done this job knows exactly what I'm talking about because: Once you push back gently all the plugs down through the injectors head, and screwed the two electronics box on top, there's no way you can even shake them-off so imagine unplugging them.By the way, what the hell do we need some extra ignoring clamps to hold them down for, and make an easy job most difficult to accomplish in the future. Peace out folks!!! believe it or not, this blue baby is running smoothly as hell without those ignoring clamps! (01 X5 4.4i M62) Last edited by mysweetx5; 04-19-2011 at 09:30 PM.
|
|
#14
05-01-2011, 11:08 AM
|
|||
|
|||
|
Do not used injectors clip anymore!
Well... you guys wasting your time making music
 all day on the dan'm injectors clip. Anyway! believe it or not, I've been there too and I know how it's feel to remove specially the last two injectors clip by the firewall. As a result, I permanently removed all of them and do not used none anymore! Everyone who been there should know exactly what I'm talking about: Because once you pushed back properly the electronic box on top of the injectors, and you screwed the bolds on top to secure the two box, there's no way you can even shake them off. So, imagine for the injectors to get unplugged down there. By the way, so what the hell do we need some extra ignoring clips to hold those injectors and make the next job removal much difficult than it supposed to be. Think you run smoother than me! I dont think so  (01 X5 4.4i) No injectors clips need it.
|
|
| Bookmarks |
|
|
|
|
Linear Mode
