help replacing window regulator

[deeznutz972]

Originally Posted by Brit6

The window should move up and down the track if you cut the wire of the regulator. Then just use your hand to move the window up and down until you can get to the proper spot to unscrew the window from the regulator. This is exactly how i did mine. I hope it makes sense. Let me know.

genius. i will try this tonight. thanks guys

[deeznutz972]

got it out by cutting the cable. now need to get a new regulator. thx guys

[AZX54.4]

I am having the same problem having difficulty removing the nut that hold the glass. How were you able to get the nut out? It seems like it is requiring a lot of force and it is not budging.

[deeznutz972]

Are you having an issue getting it in position so that you can remove the nut? If so cut the cable.

[AZX54.4]

No, I am not having trouble getting the window into position. I can get access to the nut but I am having difficulty removing it. I am applying a lot of force and the nut that holds the glass is not budging.

[deeznutz972]

Wd-40 might help I am not sure... It may corrode the plastic tabs...? Maybe try holding the other end with some pliers? Sorry man I am not much help.