|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
10-23-2010, 04:36 PM
|
|||
|
|||
|
Adaptive Head Light Control Unit error -Please help
Short question: What “3F [063] ALC reports an error at LSZ” means.
Background: My driver side low beam stopped working. I discovered water damage in the headlight control unit (number 5) on the drawing of the headlight from RealOEM. RealOEM.com * BMW E53 X5 4.8is Headlight, electronic parts, Xenon light The module and the corresponding headlight connector were corroded. I replaced the module and the headlight. LCM reports an error from AHL module (57/01 - Level control system) and does not turn on headlight unless I disable AHL option in the LCM configuration. (I use BMW scanner 1.4.0) The scanner shows AHL error “3F [063] ALC reports an error at LSZ”. I replaced the AHL module, coded it but the errors stay the same: LCM -> 16/01 - Wire, HVAC (LRA) potentiometer, open circuit Shadow-memory: 57/01 - Level control system AHL -> Shadow-memory: 39/6C - Telegram Speed invalid 3A/27 - Telegram yaw rate invalid 3B/37 - Telegram steering angle invalid 3D/27 - Telegram Terminal status, timeout or invalid 3F/62 - ALC reports an error at LSZ 
|
|
#2
10-25-2010, 01:27 PM
|
|||
|
|||
|
anyone?
|
|
#3
10-25-2010, 08:43 PM
|
||||
|
||||
|
Looking at the list of faults I'd work through the DSC faults as well, but I'd double check all the electronics and wiring connections are clean and free of corrosion. I'm not familiar with that diagnostic software or it's capabilities, but the GT1 diagnostic software offers guided diagnostic test plans and wiring schematics etc. to help diagnose the different systems.
__________________
"When you do things right, people won't be sure you've done anything at all" (Bender, futurama) You make something idiotproof, they'll make a better idiot You think professional is expensive, just wait until you pay for amateur. Never let your sense of morals prevent you from doing what is right. Examine what is said, not who speaks. X5 pics RIP 4.6is..... 2003 4.6is 
|
|
#5
02-13-2022, 11:48 PM
|
|||
|
|||
|
LCM -> 16/022 - Wire, HVAC (LRA) potentiometer, open circuit
HVAC (headlight vertical aim control) I've got this error as well. Seems like a pretty rare error on the internet. I'm posting here for E39 I upgraded my headlights a couple of years ago from pre facelift to facelift angel lights I also changed the light control module So I'm thinking the light control module I installed had the option of vertical aim control for the angel lights, whereas my car had older 1998 headlights. So in that case my headlights probably are missing some wiring to be self adjusting? I'm thinking I can either play in ncs dummy and try to disable the aim control function or try taking the zcs code from ews or cluster and coding the light control module.
|
|
#6
02-19-2022, 05:36 AM
|
|||
|
|||
|
Was working on my X5, and have the same error lol. Even though I believe I have auto leveling headlights in my X5 and LWR module.
Maybe it's time to look up wiring diagrams and start following wires
|
|
#7
02-21-2022, 01:37 AM
|
|||
|
|||
|
Well, just in case, this is how I fixed it
https://xoutpost.com/bmw-sav-forums/...ml#post1217781 Improperly coded LCM Fixed it on X5 I suspect the same error on E39, as I remember it had a swapped LCM
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
