Quote:
Originally Posted by hunds02
How long have you had them installed without errors? I don't think mine have resistors, but they were also advertised as error free. They were error free for about a month and now they barely illuminate. They will illuminate very dim, if i tap the clear lens cover it will light up but after an hour or so they will go back to being dim.
|
Over a few months now, still working great!
The trick is you need to take the housings out and bend the tabs in with a set of pliers, to make them hug the bulb contacts tighter, that way when you close the trunk or something the bulb holders stay tight onto the bulbs.
i had problems initially with the bulb holders having poor contact but that was not the fault of the bulbs themselves. good luck!
05-07-2012, 03:01 PM
Linear Mode
