gt1 success ! failsafe questions

[bdriven]

Hello guys, so hopefully, someone can benefit from my experience, I was finally able to get the GT1 working.....OBD was showing p1748, transmission module self test. GT1 reads, or looks like either 0F (zero F), or OF ( letter "O" F) and it says PRESSURE ACTUATOR EDS, TOTAL CURRENT.

Does that mean anything to anybody??? I also cleared codes 31 and 22, but the persisten is the 0F....

as far as the GT1, man, I was ready to shoot something, I said to myself, this is the last time, then it's going back on ebay....and voila! it worked.....not quite sure how I accomplished it, but it worked!

thanks guys,
2000, E53

[bdriven]

just to make sure: the gt1 reads:

0F EGS pressure actuator EDS, total current

[Nik]

I have that problem on my tranny.

[bdriven]

do you by any chance know the location of the EGS???

[Nik]

Nope, sorry.

[mywidebody02]

run the test plan on the error and should tell you what to do or how to test it.

[m5james]

Post some pics and links to your setup

[chas3]

EGS module should be under the hood, under the wipers area. However, the error doesn't indicate the module to be faulty. Run the test plan like mywidebody02 recommended.

Btw, all hex are zero indeed, not letter O

[bdriven]

Thank you chas, I did located the EGS, I put another EGS from a friend's X, I still get the same error message, but the car moves !!! something it hadn't done in a while....I have another EGS on the way, that is exactly numbered as the OE in the car, will let you know how it goes...

[mywidebody02]

Originally Posted by bdriven

Thank you chas, I did located the EGS, I put another EGS from a friend's X, I still get the same error message, but the car moves !!! something it hadn't done in a while....I have another EGS on the way, that is exactly numbered as the OE in the car, will let you know how it goes...

Did you code it for your car?