|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
02-28-2011, 07:50 PM
|
|||
|
|||
|
From the lower pic it seems like you could just push the wheel carrier toward the car and be done, but it ain't budging; the pressures are immense between the jack pushing the wheel carrier up on the outboard end, and the spring pushing it down on the inboard end. Help!
|
|
#2
02-28-2011, 07:58 PM
|
||||
|
||||
|
I am guessing you do not have the Bentley manual....did you let the air out of the air suspension? If not then once you deflate the air bags you should have no problem lining it back up.
Remove the spare tire and you will see the air suspension components and there is a blue and red line. Slowly disconnect the air fittings. Then you will be on your way to reassembling everything. Jacking it up may end up bending one of the upper arms. You will only know after you get an alignment.
__________________
_________________________________________________ 2010 X5M /// R63 AMG...Wifey's 540HP Family Hualer 2001 X5 3.0i Sport 335,448 miles & counting... SMG M3 Steering wheel E46 Stainless Racing Headers 4.6is Exhaust Turner Pulleys Afe Intake Brembo drilled rotors PowerFlex Bushings Hualingan 30mm H&R Spacers rear 20mm H&R Spacers front Bavarian Autosport High-Performance Coils Active Autowerke's Performance Software
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
