4.8is Ride Height Calibration

[Big "J"]

Originally Posted by Ricky Bobby

Working on getting that for you socket, my DIS cable is in the mail as we speak on its way to me.

I actually went for a drive last night with the wife again and no error on the dash at startup, and no error during the drive or until I parked back in the garage again, so I don't think I have any major issues here (when my air compressor was dead the SELF LEVEL SUSP INACT never went away until cleared by DIS!), I'm thinking the large deviation in ride heights creates a "soft error" that may pop on and off, but not a level 2 error like the compressor being inactive, where when that error pops up it is more of a system failure and can not be cleared even by DIS unless you fix the problem.

Here are my current measurements again on each corner:

Drivers Rear: 698 mm
Drivers Front: 723 mm
Passengers Rear: 714 mm
Passengers Front: 742 mm

RB, did you ever get this figured out? I'm need to set mine as well using INPA.

Thanks,

Jason