Pixel Repair

[ala2000]

Originally Posted by Sundayjumper

To remove the back casing there's several things you need to do:

Five plastic "X" shapes on the back you have to twist by about 15 degrees
The three big connectors all have a tiny clip built into them
The eight screws from the front of the display

There were no rivets to drill - at least on my one anyway.

Surely there's a proper write up with photos online somewhere ??

================================================== ====
These 5 "X" connector are very hard to turn. I will be able to turn it via nose pliers but it will spring back as soon as I release the pliers. Also these X connectors are directional/clockwise or does not matter which way it turns.

Thanks in advance for any helping comments.