|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
10-03-2011, 10:19 AM
|
||||
|
||||
|
Shifter question
Hey guys have a 2001 x 3.0. Had a tranny replaced about 2 weeks ago and it's great. Only one small snag that I can't get my head around. The shifter works fine, but after a while, the light on the dash goes out, no P R N D and if i push the shifter forward a bit it shows D again and all is well. Sometimes it will be in drive and show S-4 on the dash. I did get under it and tried to adjust the shifter cable and not much change. There was a little play in the cable, so I am not sure if it is a Shifter I need or do I need to get the tranny reprogrammed? It was not reprogrammed during the install.
Thoughts ???
__________________
Nobody cares what the definition of “is” is. 
|
|
#2
10-03-2011, 10:28 AM
|
||||
|
||||
|
Quote:
__________________
NAZARIO 2015 M3 / 2012 X5M BMWCCA Kiss French, Wear Italian, Drive German
|
|
#3
10-03-2011, 02:03 PM
|
||||
|
||||
|
I tried that, they adjusted the shifter and it didn't work, so I tried myself and couldn't get it to stay where I needed it. Seems to be ok going back to drive, but going back to park it sometimes will stay in R even though it is in P
Makes me think shifter cable, but not 100% And since the shifter cable is part of the shifter, it's a costly fix so I wanted to check here first.
__________________
Nobody cares what the definition of “is” is.
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
