Planning Brake Job

[UCrewX5]

Joe,

Brembo doesn't make drilled and slotted rotors. What is likely the case is that they have taken a stock set of Brembo rotors and used their machining equipment to drill and slot them. This will void any warranty that Brembo offers on the rotors, so check with the seller to see what kind of warranty they provide (usually it's pretty limited)

As for pads, I would suggest Axxis Deluxe for the most brake dust reduction.

Jeff

[ricky.agrawal]

Try trying http://www.zeckhausen.com/ first.
They are a sponsor for X5World, and I know they'll have legit stuff.

[Scott in Cincy]

Originally Posted by UCrewX5

Joe,

Brembo doesn't make drilled and slotted rotors. What is likely the case is that they have taken a stock set of Brembo rotors and used their machining equipment to drill and slot them. This will void any warranty that Brembo offers on the rotors, so check with the seller to see what kind of warranty they provide (usually it's pretty limited)

As for pads, I would suggest Axxis Deluxe for the most brake dust reduction.

Jeff

I'm not sure that is true, Jeff. I bought Brembo's that were slotted from one of the suggested folks on this website, and they certainly were factory.

I also installed the Axxis and it made a huge brake dust difference, I'd recommend it highly.

[UCrewX5]

Originally Posted by Scott in Cincy

I'm not sure that is true, Jeff. I bought Brembo's that were slotted from one of the suggested folks on this website, and they certainly were factory.

I also installed the Axxis and it made a huge brake dust difference, I'd recommend it highly.

What I believe I indicated was Brembo doesn't offer rotors that are drilled and slotted. The key word there is "and". Brembo does offer slotted rotors and they offer cross drilled rotors. But they do not offer rotors that are both drilled and slotted (note: they also offer rotors that are basic rotors with no drilling or slotting)

Originally Posted by iop9000

is this true? no sensors needed for aftermarket rotors?

No, that's not true. The sensors are part of the caliper assembly (they actually clip into the pads themselves) and have nothing to do with the rotors. Vaheh was obviously confused on this.