|
If the tire pressures are ok, and not influenced by ambient temperatures, and there are no issues with the alignment or steering angle sensor, and there are no faults stored in the DSC, then the following statment may be the cause of your FTM issue.
On vehicles with front and rear air suspension, a CAN error can set the TPM malfunction lamp on, interrogate the fault memory, and see if there is a fault stored in the EHC module for a CAN fault. Perform the test plan, and it will state to replace the EHC module with the latest coding index of 23
|
12-08-2011, 12:06 AM
Hybrid Mode
