Need to know how many wires are in the 6-pin connector coming out of your CD changer and going up to your dash. I assume anyone with a non-nav CD changer has the Professional single disc player in your dash mounted above your MID/radio....
I've got a DICE Mediabridge unit that I CANNOT get to work with my setup, and I can't figure out why. I've got signal at the end of the DICE-supplied wiring harness that plugs into the factory harness back where the CD changer should be, but I'm not getting any audio from the iPod or from my BT-linked phone.
My harness from the 6-pin connector that goes into the CD changer (if it were there) and goes up to the dash only has 3 wires in it....the DICE harness coming from the Mediabridge unit has 4 wires. I've got both channels of signal at the end of the DICE harness, but only one channel of signal back at the dash after plugging into the BMW harness.
Also, does anyone know what makes the system switch over to the signal from the CD changer? When I toggle modes with the Mediabridge attached, the system recognizes that there's something hooked up to the CD changer circuit (with the Mediabridge disconnected, I can only toggle between the radio and the in-dash CD player when I hit the mode button...when it's connected, it shows me the CD changer display, and also shows the music titles and switches between tracks on the iPod or phone, so it's opening up that circuit...it's just not finding the audio....)