|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#501
|
||||
|
||||
As for the SSK - do look at Green Dragon's posts, maybe PM him, as he has done recent mods beyond a UUC SSK install, and can best address your questions.
__________________
2006 X5 3.0 6-spd w/Evo UUC ssk sport/premium pkgs born Valentine's Day, 2006. |
Sponsored Links | |
|
#502
|
|||
|
|||
Hmm sounds like it might be a diffrerent place. I dont remember them having a separate facility. Either way I am glad it worked out for you.
I ended up getting an M a few months after within 50 miles from me. Funny how things can work out! I will check out his post. Thanks for that. |
#503
|
||||
|
||||
Mine is an 2001 3.0i converted to 6 speed manual.
|
#504
|
|||
|
|||
Awesome
|
#505
|
||||
|
||||
conversion from 5 to 6 speed
How did you do this? Use 6 speed transmission and front / rear drive shafts but original transfer case (NV125)?
__________________
2002 Euro X5 (E53) 3.0 diesel (M57) 5 speed manual with UUC short shifter. Pre-xDrive NV125 transfer case (chain & gears). Factory Xenon headlights, Spyder LED tail lights Updated vortex crankcase breather. Motorsport dead pedal, factory fire extinguisher, factory first aid kit, factory F&R mud flaps, factory PDC Bilstein B6 shocks F&R Redline oil has replaced "lifetime" fluids (F&R diff, manual transmission, transfer case and P/S). Dimple magnetic drain plugs in all compartments. |
#506
|
||||
|
||||
You need to use the xdrive transfer case and driveshafts.
|
#507
|
||||
|
||||
So this is mostly bolt up BUT how you do control the xDrive solenoid on that transfer case with a pre-xDrive car?
__________________
2002 Euro X5 (E53) 3.0 diesel (M57) 5 speed manual with UUC short shifter. Pre-xDrive NV125 transfer case (chain & gears). Factory Xenon headlights, Spyder LED tail lights Updated vortex crankcase breather. Motorsport dead pedal, factory fire extinguisher, factory first aid kit, factory F&R mud flaps, factory PDC Bilstein B6 shocks F&R Redline oil has replaced "lifetime" fluids (F&R diff, manual transmission, transfer case and P/S). Dimple magnetic drain plugs in all compartments. |
#508
|
||||
|
||||
Sarek, don't tease us. As Gregory's polite questions indicate, there is probably significant interest here in the 'conversion to manual' process, give the age of our vehicles and the failure rate in auto trannies. Please post here, or as a separate post, your process for converting a pre X-drive auto to an X-drive/six speed [as in a 2004-06 3.0L manual, like mine ...... though it looks like you did significant suspension mods, too.
__________________
2006 X5 3.0 6-spd w/Evo UUC ssk sport/premium pkgs born Valentine's Day, 2006. |
#509
|
||||
|
||||
You dont need to worry about the xdrive motor unless you really want to. In my case, I locked the transfer case motor to full 50 50 locked. Obviously only good for off road. If you leave the motor as is, it will function similar to your current transfer case. Just leave the motor installed with nothing plugged in. It does not throw any faults or cause any problems. You could go crazy and try to retrofit the transfer case module, however I havent looked into that. Probably a pain to get working.
|
#510
|
||||
|
||||
I have an X drive transfer case and front and rear driveshafts available if anybody is interested
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|