Dynavin GPS connection issue

[vtyagi]

Hello guys,

I have an 2000 X5 with the 4x3 GPS unit (no DSP) and the LCD on it finally died.

After some online research, I purchased a Dynavin E39A GPS unit with the long wire harness.

Well, I have torn the whole back-end of the vehicle apart, and there is no place to plug the thing in? I spoke to Jeff at J&T Distributing, and he said that it "should fit right in there." Well....it doesn't!

So, I have taken a picture of the back and attached it to this post with the hope that *someone* out there knows what's going on.

Please help asap...the vehicle is torn apart and sitting in my driveway

Thanks,
Vic

[blkxer]

Are you referring to the fakra cable to extend from the back to the Dynavin unit? If so, check the radio unit located under the spare tire, next to the battery.

[Rewmer]

As above, you need to take the plug out of the radio module behind the battery and plug you cable into the loom that you have just disconnected.

[vtyagi]

Thanks guys! I found it just as you said. I have ran the cable to the Dynavin and it is working well so far

[hova1222]

Post some pics and let us know how you like it