X5 4.6 5hp24 transmission jerks, when car comes to complete stop. Possible solution.

[nafania]

Couple days ago, i found a guy who replaced his transmission with "029" on his 4.6is and sold his car. According to him he didn't notice any difference in power loss or gain. So, i went to his place and took a look at his valve body and it came with "029" part number. So, according to a ZF par number list it should have different valve housing part number. But if you take a practice part and what i saw - transmission "034" has a valve body from "029".

So, People please help me out here!

If you have a valve body that came out from "034" 4.6is transmission COULD you please tell me that part number of 55.010 Valve housing. What do you have?

- 1058 327 059 Valve Housing 1 005/009/013/014/015/016/024
- 1058 327 068 Valve Housing 1 021/022/026/027/028/029/032
- 1058 327 075 Valve Housing 1 034

Thank you Very Much!

P.S. According to my research (i have seen 3 valve bodies so far from "034" transmission) all of them had 1058 327 068 Valve Housing 1 021/022/026/027/028/029/032

[RRPhil]

I assume you’re asking people to check the casting number on the valve block i.e. 1058 427 068? I’ve never had the pleasure of rebuilding a ‘034’ transmission - so this is pure speculation - but it’s possible that ZF make the 1058 327 068 block and the 1058 327 075 block from the same 1058 427 068 casting so the part number cast on the block will be the same. The only way to tell, then, would be by comparing the B & E clutch valves.

Phil