E53 4.4i with engine light on

[dlclarke]

I need some advice as to where to start looking on this, some searches have turned up few ideas, so here we go I guess...

Here is what I am getting from INPA.

Any suggesting or experience with the same fault gratefully received.

Error registration 3 : 0x001B: LR-Adaption multipl. Area1 (Bank2)<<<<!!!
Error accurances: 6
Logistic counter : 23

Error accure 1st time at:
Engine speed
 2320.00 /min
relative air charged (rl) 37.50 %
Intake air temperature 19.50 Grd C
gas level77.00 l

Error accure 2nd time at:
Engine speed 2280.00 /min
relative air charged (rl) 48.00 %
Intake air temperature 19.50 Grd C
gas level 77.00 l

Error accure last time at::
Engine speed
 1240.00 /min
relative air charged (rl) 21.00 %
Intake air temperature 36.75 Grd C
gas level 72.00 l

--

--

--

Limit at rich range reached current,
--

--
Limit at rich range reached Initial,
--
--
--
--

CARB debounce

SCATT-active

--

--

Fault sporadic


[dlclarke]

anyone?

[BavariaTexan]

What is the Code that is being pulled? That seems to be the log of the error.

[TiAgX5]

Is this an M62 or N62 4.4L?

[TiAgX5]

Originally Posted by dlclarke

.....Any suggesting or experience with the same fault gratefully received....

Been almost 3 months, bet he got it running and forgot all about this.

Don't say you'r grateful of receiving suggestions/help and not reply when members try to assist you in troubleshooting, you send mixed signals!

[dodoni1]

check engine light on means some fault code stored in your car,
you can get a code scanner tool clear it.

[bastereo]

Oh my. That sure does sound like a good idea. But the guy obviously has something better that your crap you keep pushing around here, he just didn't know how to use it.
And that was 3 months ago.
DO YOU READ THE POSTS THAT YOU ARE SPAMMING?

Sent from my SGH-i917 using Board Express

[tmv]

Originally Posted by TiAgX5

Been almost 3 months, bet he got it running and forgot all about this.
Don't say you'r grateful of receiving suggestions/help and not reply when members try to assist you in troubleshooting, you send mixed signals!

Hate it when this happens. Dead-End thread.