Wheel fitment question? Style 127's?

[Green Dragon]

Found some style 127's for sale local here. I think these are replicas as they are found on the e46 M3 CSL. 19X9.5 and 19X8.5. My guess is that they would fit. Question being, are they strong enough and what tire fitment would you use with that staggard set? Anyone have these mounted on thier X?

[Green Dragon]

Update: the seller told me they are not staggered and are 19X9.5 They look staggered to me.

[mrbmwx5]

You need to find out about the wheels et,if the offset is 35et you be ok,i ran the Hamann PG2 19x8.5 with 35et (was made for E46)and had no problem .

[epdarks]

Make sure the hub bore is the same.

Offset needs to be in the mid 30s or else you will need spacers. You'll probably need spacers in the rear regardless.

[tmv]

All BMWs have the same hub-bore size except E39, E70/71.
Those wheels should be strong enough, but I suspect offset would be all wrong. E46 M3 CLS wheels offset are 44mm front, 27mm rear.

[TriX5]

I have set of 02 M3 e46wheels (8&9s) that I used to run on the e53 and they fit fine. Et is 27 rr and 47 front. Given that the stock offset on 8.5x18s is 48mm it works just fine.