|
Yeah I definitely am thinking about how to get enough clearance to get the half shaft out of the way, but still leave it attached to the car in a couple points so that its easier to press in and out.
If those are the 5 mounting points, I did read the CV boot thread and according to a BMW tech if you want a lot of clearance without messing with ball joints, disconnect the wishbone control arm at the engine side, and leave connected to the knuckle. I think I'll disconnect that, and the 2 bolts on the strut, and just support the weight with a jack stand.
I'm hoping disconnecting those 3 bolts will give me the clearance I need to keep the half shaft in the differential, like I said I will most likely replace the outer boots if its all out anyway ya know.
__________________
2018 Ram 2500 6.7L Cummins 68RFE
19k miles -Bright White/Black - Big Horn Sport - Crew Cab Short Bed
2013 X5 35D (CEO's) - Born on 5/17/2013 -
82k miles - Alpine White/Cinnamon Brown/Premium Pkg, Sport Activity/Premium Pkg and Sound/20" Style 214/Running Boards
Last edited by Ricky Bobby; 05-07-2013 at 10:51 AM.
|
01-15-2013, 09:56 AM
Threaded Mode
