Coding, what not to forget?

[TerminatorX5]

Originally Posted by jgold47

I checked again and don't have it. It must be a added revision in later lcm's. I've pm'd terraphantom on another board as he is a bit of an lcm coding guru. I don't want to mess with a new lcm either.

in the newer cars the line actually reads FL_BIXENON... in mine, it did not - i just stumbled across that line by accident, and we changed the value from 02 to 01 in hopes that it would work...

do a search in your file for anything that has FL in it - the FL is the highbeams... it could be that the line in yours is coded with different verbiage...

[jgold47]

Originally Posted by TerminatorX5

in the newer cars the line actually reads FL_BIXENON... in mine, it did not - i just stumbled across that line by accident, and we changed the value from 02 to 01 in hopes that it would work...

do a search in your file for anything that has FL in it - the FL is the highbeams... it could be that the line in yours is coded with different verbiage...

Here ya go:

FL_DIMMUNG_ALS_DRL
wert_06
FL_UND_NSW_NICHT_GLEICHZ
nicht_aktiv
HEIMLEUCHTEN_FL
nicht_aktiv
BI_XENON
aktiv
CC_MELDUNG_FL_L
aktiv
CC_MELDUNG_FL_R
aktiv
KALTUEBERWACHUNG_FL_L
aktiv
KALTUEBERWACHUNG_FL_R
aktiv
PWM_ANSTEUERUNG_FL_L
wert_01
PWM_ANSTEUERUNG_FL_R
wert_01
WARMUEBERWACHUNG_FL_L
aktiv
WARMUEBERWACHUNG_FL_R
aktiv
FLC_LED_EIN
aktiv

ENABLE_US_SBR
nicht_aktiv

The only ones I dont recognize are the PWM ones, but those are for each light (every light has its own line)

anyone know what that last one is? Enable US SBR?

[TerminatorX5]

Originally Posted by jgold47

Here ya go:

FL_DIMMUNG_ALS_DRL
wert_06
FL_UND_NSW_NICHT_GLEICHZ
nicht_aktiv
HEIMLEUCHTEN_FL
nicht_aktiv
BI_XENON
aktiv
CC_MELDUNG_FL_L
aktiv
CC_MELDUNG_FL_R
aktiv
KALTUEBERWACHUNG_FL_L
aktiv
KALTUEBERWACHUNG_FL_R
aktiv
PWM_ANSTEUERUNG_FL_L
wert_01
PWM_ANSTEUERUNG_FL_R
wert_01
WARMUEBERWACHUNG_FL_L
aktiv
WARMUEBERWACHUNG_FL_R
aktiv
FLC_LED_EIN
aktiv

ENABLE_US_SBR
nicht_aktiv

The only ones I dont recognize are the PWM ones, but those are for each light (every light has its own line)

anyone know what that last one is? Enable US SBR?

PWM - Pulse Width Modulation, way of controlling the intensity of the lights
ANSTEUERUNG - controlling... what it means, i have no idea,

your file does not have highbeams and the xenons... i wonder if that line is hidden under other names - is there anything in your file with BIX?

also, I wonder, what happens when the values in the FL PWM changed from 01 to 02...

Are you willing to look further in your file? getting a new LCM could be costly and also requires programming of the mileage into the new module, to avoid the tamper dot... might not be worth it...