|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
12-13-2012, 04:32 PM
|
|||
|
|||
|
2001 x5 4.4 starts then dies.....HELP!!!!
my 2001 x5 4.4 will start then dies everytime, throwing these codes:
P0120 = Throttle/Pedal Position Sensor/Switch "A" Circuit P0121 = Throttle/Pedal Position Sensor/Switch "A" Circuit Range/Performance P0123 =Throttle/Pedal Position Sensor/Switch 'A' Circuit High P0223 = Throttle/Pedal Position Sensor/Switch 'B' Circuit High I replaced the pedal assembly and throttle body with new equipment, I also replaced the DME with one from ecudoctors.com ......same thing!! .HELP!!! [email protected] 919-417-4448 someone please text me or email me! Last edited by blakey2000; 12-13-2012 at 08:28 PM. 
|
|
#2
12-13-2012, 05:33 PM
|
|||
|
|||
|
There was a throttle calibration reset somewhere by Killcrap. Something like you putting in the key, and flooring the car without starting, holding it there for a while, then i don't remember.
Have you checked for air leaks.
__________________
2006 4.8is, Black on White. SOLD Sniff Sniff. 2017 F85 x5m, Black on Red. BEAST MODE "The older we grow the greater becomes our wonder at how much ignorance one can contain without bursting one's clothes." - Mark Twain Unlock OBC post 5
|
|
#3
12-13-2012, 05:48 PM
|
||||
|
||||
|
Here's one of the versions ....http://www.xoutpost.com/articles/x5/...-ms43-edk.html
__________________
2004 X5 3.0i Mod list: Currently Longer than the maximum allowed characters that can be typed here... 
|
|
#4
12-13-2012, 07:55 PM
|
|||
|
|||
|
I tried this throttle adaptation multiple times.......no success?
no success. The car will start and shut off, if I try to use the throttle theres no response. And Im assuming thats what those throttle pedal codes mean too. Im stumped
 WHEN i TURN THE KEY FORWARD I DO HEAR the throttle flap open and close once but thats it.
|
|
#5
12-13-2012, 08:05 PM
|
|||
|
|||
|
my truck is a 2001 4.4
maybe theres a different process for the v8?
|
|
#6
12-13-2012, 08:08 PM
|
|||
|
|||
|
Yes, try flooring it while it opens the throttle, then start the car with foot still on throttle.
__________________
2006 4.8is, Black on White. SOLD Sniff Sniff. 2017 F85 x5m, Black on Red. BEAST MODE "The older we grow the greater becomes our wonder at how much ignorance one can contain without bursting one's clothes." - Mark Twain Unlock OBC post 5
|
|
#7
12-13-2012, 08:16 PM
|
|||
|
|||
|
to set adaptations? is that what you mean? because flooring it does nothing since the throttle doesnt work at all
|
|
#8
12-13-2012, 10:53 PM
|
|||
|
|||
|
I am really not sure what else to suggest. Can you connect to gt1/dis? Something other than a regular scanner.
__________________
2006 4.8is, Black on White. SOLD Sniff Sniff. 2017 F85 x5m, Black on Red. BEAST MODE "The older we grow the greater becomes our wonder at how much ignorance one can contain without bursting one's clothes." - Mark Twain Unlock OBC post 5
|
|
#9
12-14-2012, 10:22 AM
|
|||
|
|||
|
Im going to look at it with carsoft today. wondering if theres a loose wire, harnesses look good.
|
|
#10
12-14-2012, 06:45 PM
|
||||
|
||||
|
Could be a dirty throttle plate. See this video in it entirety.
https://www.youtube.com/watch?v=4C075DS2Ud4
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Hybrid Mode
