|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
CV boot is not likely to tear down at the small end - not much flexing there. They usually go at the "valley" of the largest bellow section - where the most flex occurs.
Conditioning them may help but not likely. Quality of material is what matters here....
__________________
Wayne 2005 BMW X5 3.0d (b 02/05) 2001 BMW F650GS Dakar (b 06/01) |
|
#2
|
|||
|
|||
|
yup you are right i guess, so far both fronts when they perished did so on larger end of bellows that flex more, those were the oems on car for about 10years....replaced one side with febi brand and the other can't remember....to be frank the spraying of silicon on em has mean't they are spotless,no grime or grit seems to have collected on em...will keep an eye out on the small end of one of them where it has cracked superficially....
__________________
E53 X5 3.0d SUV prod.date 11/2004 eng.variant M57N Europe Right hand drive N |
|
#3
|
|||
|
|||
|
The CV Joint big ball bearings last the life if the car, they easily last some 300K-400K miles.
They fail mostly bc of torn boot, allowing debris to get in. If the owners of the vehicles routinely remove the axle every 100K and replace using GKN boots, then the CV joint lasts forever. Most axles from local auto parts are made in China with questionable quality.
__________________
1998 E39 528i 5sp MT 2006 E53 X5 3.0 6sp MT |
|
#4
|
|||
|
|||
|
Quote:
That was the brand GKN, one boot is febi the other gkn....now the quality of replacements (axles and the like) being degraded because they are made in eastern Europe or china or whatever makes me think don't the parts suppliers have any quality control in place and adhere to various ISOs etc?
__________________
E53 X5 3.0d SUV prod.date 11/2004 eng.variant M57N Europe Right hand drive N |
|
#5
|
|||
|
|||
|
I just discovered mine let go at the small end when I was doing my brakes.
|
|
#6
|
||||
|
||||
|
Quote:
![]() At least the small end is easy to deal with until you can replace the boot. A foot of PIB tape (polyisobutylene - self-amalgamating rubber or rescue tape) should hold it for many months...
__________________
Wayne 2005 BMW X5 3.0d (b 02/05) 2001 BMW F650GS Dakar (b 06/01) |
|
#7
|
|||
|
|||
|
Quote:
|
![]() |
| Bookmarks |
|
|
|
|