Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Fluid Motor Union
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 04-03-2024, 02:32 PM
Member
 
Join Date: Jan 2024
Location: Pittsburgh, PA
Posts: 206
Factory6speed is on a distinguished road
Very important trick for installation

https://youtu.be/Qo4aeTEFGZs?si=D-UrIABTDW6Lvn-H

I did GKN ones from FCP. They were not cheap. But I've never had anything but terrible luck with the less expensive axles, I'm done with those. lifetime replacement on good axles

Only one of them came with a nut, and it was the wrong size nut and I didn't want to buy another never otherwise used 12-point socket, when I just bought one for the stock nut. The missing nuts held me up about a week. So make sure the ones you're ordering from wherever come with new nuts and you have the correct socketry which may or may not be the same OEM size.

I didn't do the seals because it didn't look like they were leaking at the time, and now lo and behold the one is leaking, so I get to do it again. Which I knew I was going to do them again anyway soon due to the oil pan gasket, so I guess that was why I decided not to do the seals. Definitely do the seals while you are there.

They were pretty easy to carefully tap out of the hub with the right size punch into the hole in the center. Getting the new ones back into the hub was a little harder. I hammered the ring on the hub with a 4x4 block of wood for a long time and it slowly walked in. The block of wood didn't hold up so well. Tapping them out of the diff was a little tricky as well just required some rotation, and then getting them in also required correct orientation per the video. Which I was not aware of when I did this job and struggled a bit to get the clip in.
__________________
'05 E53 3.0 6mt
'17 F30 340ix 6mt
'96 E36 328is, in progress

Last edited by Factory6speed; 04-03-2024 at 04:16 PM.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 11:57 PM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.