Back up camera

[TerminatorX5]

Wired it to PDC, pins 7 for the signal and I think pin 6 for ground... I will do a write up, as i did take a lot of pictures, including the soldering of wires and whatnot...

Once I do the write up, I will post to one of the reverse camera threads that spawn on this forum, like there is no tomorrow!!!! hahaha

camera comes on as the gear goes to reverse, stays on while i back up, and stays on for a bit longer as i drive forward and then flips off, as the PDC shuts off at certain speed forward...

my kids are having blast turning the camera on manually and making faces into the camera when i am parked with engine running...